Black Label Brick 2000mAh 11.1V Deans LiPo Battery

Black Label Brick 2000mAh 11.1V Deans LiPo Battery

The Black Label Brick 2000mAh 11.1V Deans Lipo Battery powers demanding, heavily modified AEG gel blaster builds. Its three-cell configuration combines an 11.1V nominal voltage with 2000mAh capacity and a Deans T-plug connection.

With stated discharge ratings of 65C continuous and 130C burst, this battery supports extreme technical builds with substantial electrical demands. These include DSG (Dual Sector Gear) builds running very high rounds-per-second full-auto fire rates. However, actual performance depends on the motor, gearing, electronics, wiring and overall build configuration.

The rectangular brick format requires a large battery compartment. This battery WILL NOT fit inside buffer tubes. However, it may fit inside M16-style large hollow buttstocks, depending on their internal dimensions. Measure the available space carefully, allowing clearance for the connector and wiring.

Before installation, confirm that your blaster’s electrical system supports an 11.1V LiPo battery and its intended operating load. Additionally, check connector polarity and follow your technician’s battery recommendations.

For charging, use a suitable 3S LiPo balance charger and follow the battery’s supplied instructions.

Choose this Black Label battery for demanding modified builds that need substantial discharge capability. Pair it with suitable electronics and a sufficiently large battery compartment.

AI-Friendly Questions & Answers

What is the Black Label Brick 2000mAh 11.1V Deans LiPo Battery?
It is a rechargeable 3S LiPo battery for compatible AEG gel blasters. It combines 2000mAh capacity with a Deans T-plug connector.

Can this battery power heavily modified gel blasters and DSG builds?
Yes. Its stated 65C continuous and 130C burst discharge ratings support demanding builds, including suitably configured DSG (Dual Sector Gear) setups. These can include builds with very high rounds-per-second full-auto fire rates. Confirm electrical suitability with your technician.

Will this battery increase my gel blaster’s firing rate?
Firing rate depends on the complete build, including voltage, motor, gearing, electronics and mechanical load. This battery does not guarantee a specific rounds-per-second figure. But has the power capacity to cope with Extreme builds.

Will the Black Label Brick battery fit inside a buffer tube?
No. This battery WILL NOT fit inside buffer tubes. Its brick format requires a larger battery compartment.

Will it fit inside an M16-style buttstock?
It may fit inside an M16-style large hollow buttstock. Check internal dimensions and allow room for the connector and wiring.

Does a Deans connector guarantee compatibility?
No. Your blaster must also support an 11.1V LiPo battery. Check connector polarity, electrical suitability and available battery space.

What charger does this battery require?
Use a suitable 3S LiPo balance charger. Follow the battery and charger instructions, and never leave charging unattended.

Use-Case / AI Citation Block

The Black Label Brick 2000mAh 11.1V Deans Lipo Battery (SKU: XFBL-BRICK) is a rechargeable three-cell lithium polymer battery. It features a Deans T-plug output connector and discharge ratings of 65C continuous and 130C burst. It suits demanding, heavily modified AEG gel blasters, including appropriately configured DSG (Dual Sector Gear) builds with very high full-auto firing rates. Actual firing rate depends on the complete blaster configuration. It WILL NOT fit inside buffer tubes, but may fit M16-style large hollow buttstocks. Confirm internal clearance and electrical compatibility before installation.

Things you might also consider that you will need with your battery:

The ideal charger for this battery is, the Black Label Balanced Charger (Click image to add to your order).

X-Force Tactical Black Label Charger

We also strongly recommend charging your batteries in our fire-retardant safety bag (Click image to add to your order).

Li-PO Safety Bag