Polarstar Jack Complete O-Ring Seal and Screw Set
Polarstar Jack Complete O-Ring & Screw Set (MP7 Excluded)
Restore peak efficiency and airtight performance in your PolarStar JACK engine with this genuine complete O-ring and screw service kit.
Keep your PolarStar JACK running at peak performance with genuine O-ring and seal kits designed to restore airtight efficiency and consistent output.
Type: Jack Complete O-Ring & Screw Set (MP7 Excluded)
Brand: PolarStar
Colour: Black
Weight: 1 g ( 2 g including packaging)
Check out the Whole PolarStar range here.
Polarstar Micro Reg Complete O-Ring Seal Set
Polarstar Micro Reg Complete O-Ring Seal Set
Restore airtight performance and eliminate pressure leaks in your PolarStar Micro Reg with this genuine complete O-ring seal set.
Essential maintenance parts for PolarStar regulators, these O-ring seal kits restore airtight performance and ensure consistent HPA output in demanding builds.
Type: Micri Reg Complete O-Ring Seal Set (GEN1 & GEN2)
Brand: PolarStar
Colour: Black
Weight: 1 g ( 2 g including packaging)
Check out the Whole PolarStar range here.
Polarstar F2 Centreline Version Complete O-Ring Seal Set
Polarstar F2 Centreline Version Complete O-Ring Seal Set
Refresh your PolarStar F2 Centreline engine with the genuine complete O-ring seal set. A must-have maintenance kit for restoring seals, preventing leaks, and keeping your HPA setup running consistently.
Genuine PolarStar F2 Centreline O-ring seal kit for maintenance, rebuilds, and restoring air efficiency. Includes the full listed seal set for key F2 sealing points.
Type: F2 Centerline Version Complete O-Ring Seal Set
Brand: PolarStar
Colour: Black
Weight: 1 g ( 2 g including packaging)
Check out the Whole PolarStar range here.
GladiatAir U122 Carbon Fibre Air Tank with GladiatAir Regulator
GladiatAir U122 Carbon Fibre Air Tank with GladiatAir Regulator
Maximum capacity, minimal compromise—122ci (2.00L) carbon fibre HPA tank built for extended runtime and serious HPA performance.
The GladiatAir U122 delivers maximum 4500 PSI air capacity with a lightweight carbon fibre build, ideal for extended-runtime HPA gel blaster setups.
Type: HPA tank for gel blasters
Material: Ultra lite carbon fiber
Colour: Black with Red logo.
Disclaimer: Due to being a pressurised containesm these items cannot be express posted.
View the whole Gladiatair range, by clicking the image below
GladiatAir Xtra-Lite X68-A Air Tank with WarriAir Regulator
GladiatAir Xtra-Lite X68-A Air Tank with WarriAir Regulator
Ultra-light 68ci carbon fibre HPA tank paired with the precision WarriAir regulator—built for serious performance in gel blaster and HPA setups.
The GladiatAir X68-A Xtra-Lite tank delivers lightweight 4500 PSI performance with a WarriAir regulator Pre-Installed, making it an ideal choice for modern HPA gel blaster setups.
Type: HPA tank for Gel Blasters, Paintball and similar.
Regulator: WarriAir regulator from GladiatAir
Material: Xtra-Lite carbon fiber
Colour: Black with red Logos
View the whole Gladiatair range, by clicking the image below
Polarstar MRS Complete O-Ring Seal Set
PolarStar MRS Complete O-Ring Seal Set
Restore airtight performance to your PolarStar MRS regulator with this complete OEM seal kit—precision-fit O-rings for reliable HPA output.
Keep your HPA system running smoothly with complete regulator seal kits designed for reliability, consistency, and long-term performance.
Type: MRS Complete O-Ring Seal Set
Brand: PolarStar
Colour: Black
Weight: 1 g ( 2 g including packaging)
Check out the Whole PolarStar range here.
Polarstar Switchboard V2 Fusion Engine – Gen 3
PolarStar Switchboard V2 Fusion Engine – Gen 3
Restore precision trigger response and firing reliability in your Fusion Engine with this genuine Gen 3 V2 switchboard.
A dedicated replacement switchboard for PolarStar Fusion Engine Gen 3 systems, ensuring precise trigger control and reliable HPA performance in V2 builds.
Type: V2 Trigger Switchboard (Fusion Engine Gen 3)
Brand: PolarStar
Colour: Blue
Weight: 3 g ( 4 g including packaging)
Dimensions: 30.3 mm (length) x 17 mm (width) x 14 mm (Height – to tops of connector blocks)
Check out the Whole PolarStar range here.
Polarstar Universal Plugboard 10000207
PolarStar Universal Plugboard 10000207
A must-have wiring solution for custom HPA builds—connect solenoids, trigger, and selector with precision using PolarStar’s Universal Plugboard.
Essential wiring solution for PolarStar HPA systems, enabling clean and reliable integration of trigger, selector, and solenoid components in custom builds.
Type: Universal Plugboard 10000207
Brand: PolarStar
Colour: Blue with white connectors
Weight: 1 g ( 2 g including packaging)
Dimensions: 23 mm (length) x 10 mm (width) x 7mm (Height – to tops of connector blocks)
Check out the Whole PolarStar range here.
E&C Black Colt MK16 Value Plus M-LOK URGI AEG Gel (EC-633NY-BLK)
E&C Black Colt MK16 Value Plus M-LOK URGI AEG Gel (EC-633NY-BLK)
Type: E&C Black Colt MK16 Value Plus M-LOK URGI AEG Gel (EC-633NY-BLK)
Material: Metal Alloy / Polymer
Gearbox: E&C Ultra Line Gearbox with a pre-installed MOSFET
Battery Connector: T-Deans
Uses: 7-8 mm gels
Length: 723 mm (Stock Retracted) to 806 mm (Stock Extended)
Weight: 2347 g (actual product weight)
Performance:
- FPS: 320
- RPS:19
Please note that, weight shown below is the volumetric weight, for shipping calculations, and not the actual product weight.
Polarstar MCU wire harness – Mag terminal wire
Polarstar MCU wire harness
Trigger-controlled magazine feeding for HPA builds. This PolarStar MCU wire harness delivers clean, reliable integration between your FCU and box mag system.
Upgrade your HPA setup with precision wiring components, including MCU harnesses for trigger-controlled magazine feeding. Built for reliability in custom Gel Blaster and airsoft builds.
Type: MCU Mag Terminal harness wire
Brand: PolarStar
Colour: Black (Black and blue inner wires)
Weight: 1 g ( 2 g including packaging)
Length: 45.72 cm ( 18 Inches)
Check out the Whole PolarStar range here.
Polarstar Fusion Engine R107 Solenoid Valve
Polarstar Fusion Engine R107 Solenoid Valve
High-performance replacement solenoids for PolarStar Fusion Engine systems. Designed for fast response, consistent airflow, and long-term reliability in HPA builds.
Restore peak performance in your Fusion Engine with the genuine PolarStar R107 solenoid valve—fast response, tight sealing, and reliable 200 PSI operation.
Type: R107 Solenoid Valve for ther Fusion Engine
Brand: PolarStar
Colour: Black & Silver
Weight: 2 g ( 3 g including packaging)
Size: 35.5 mm x 16.5 mm (Main Body plus approx 115 mm of wiring harness)
Check out the Whole PolarStar range here.
Polarstar F2 HPA Engine Poppet – Standard
Polarstar F2 HPA Engine Poppet – Standard
Restore peak performance to your PolarStar F2 with the OEM Standard Red Poppet—delivering maximum airflow, power, and tuning flexibility.
Essential internal components for PolarStar F2 HPA engines, including poppets, seals, and tuning parts designed for performance, efficiency, and reliability.
Type: F2 HPA Engine Poppet – Standard
Brand: PolarStar
Colour: Red
Weight: 2 g ( 3 g including packaging)
Size: 36 mm x 11.5 mm
Check out the Whole PolarStar range here.
Tornado Tan Drop Leg Pistol Holster
Tornado Tan Drop Leg Pistol Holster
Secure your Gel Blaster sidearm with the Tornado Tan Drop Leg Pistol Holster, a practical tactical leg rig built for stable carry, fast access, and an adjustable fit.
Type: Drop leg holster for gel blaster pistols
Specifications:
- Colour: Tan
- Material: 600D Oxford Cloth
- Product Size: 42*9*20cm
- Product Weight: 300g
PolarStar V3 AEG Switchboard
PolarStar V3 AEG Switchboard
Upgrade your V3 HPA conversion with the genuine PolarStar V3 Switchboard. It is built for TM-spec V3 gearboxes and supports F2, F1, and JACK single or dual solenoid systems.
The PolarStar V3 Switchboard is a genuine replacement trigger board for TM-spec V3 gearboxes using F2, F1, or JACK HPA systems. It is ideal for repairs, rebuilds, and clean V3 HPA conversions.
Type: V3 AEG Switchboard
Brand: PolarStar
Colour: Blue
Weight: 2 g ( 3 g including packaging)
Size: 41 mm x 17.4 mm
Check out the Whole PolarStar range here.
PolarStar V2 AEG Switchboard
PolarStar V2 AEG Switchboard
The PolarStar V2 AEG Switchboard is a genuine replacement trigger board for TM spec Version 2 gearboxes, designed for use with PolarStar F2, F1 and JACK HPA systems. Ideal for repairs, rebuilds and correct-fit HPA conversions.
The PolarStar V2 AEG Switchboard is the correct replacement board for TM spec Version 2 gearboxes running compatible PolarStar F2, F1 or JACK HPA systems.
Type: V2 AEG Switchboard
Brand: PolarStar
Colour: Blue
Weight: 3 g ( 4 g including packaging)
Size: 38 mm x 31 mm
Check out the Whole PolarStar range here.
PolarStar Filtered QD Fitting for 6mm Tube
PolarStar Filtered QD Fitting for 6mm Tube
The PolarStar Filtered QD Fitting adds inline filtration and quick disconnect convenience to 6mm HPA tubing systems. A smart upgrade for cleaner airflow and better protection of sensitive HPA components.
Add extra protection to your air system with the PolarStar Filtered QD Fitting. Built for 6mm tubing and Foster 2-Series compatibility, it helps keep contaminants out while maintaining reliable airflow.
Type: Air Line Filtered QD Input Fitting
Brand: PolarStar
Colour: Silver
Weight: 18 g ( 20 g including packaging)
Length: 50.5 mm
Assault Rifles
Pistols
Pistols Electric
Pistols Manual Springer
Shotguns
SMG
HPA Air Lines
HPA Magazine Adaptors
HPA Maintenance
HPA Parts
HPA Regulators
HPA Tanks
Cylinder Assembly