CowCow 140% Hammer Spring For TM G-Series Gel Blasters

Highlighted features

• Made from High Strength Spring Steel
• Hard Coating Prevents Corrosion
• Enhances Blowback Kick
• For TM G Series, TM G17 Gen4

**Important Notice**

It may cause a condition where your pistol cannot feed the gel ammo due to a lightweight gas supply. You simply remove a spacer to solve the issue. Alternatively, you should consult your X-Force pistol tech for advanced fitting to solve this issue as well.

Increases in FPS can be achieved; however, it may require other parts to achieve this, and advanced Tech skills are needed for proper installation. Improper installation/fitting can shorten the life of your Blaster, and any damage caused by improper installation will not be covered by warranty.

*PS: Please note: installing parts / assembling/fitting Gel Blaster pistol parts will need intermediate knowledge; for an expert or gel ball gunsmith.
Please refer to your X-Force Pistol Tech for proper installation/fitting. Fitting may be needed as the condition of each gel ball gun might be different. Regular maintenance is needed for all gel ball guns in order to keep it in good working condition and reduce wear-out issues on parts.
The actual performance is based on the overall setting on your airsoft gun. Please consult your X-Force Pistol Tech for advice.
Strong Screw glue, such as Loctite, is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry overnight. Damage could be caused to the screw thread if screw glue was not used.