CowCow Enhanced G18C Piston Head For TM G-Series Gel Blaster Pistols

CowCow Enhanced G18C Piston Head For TM G-Series Gel Blaster Pistols

Improve the seal and air flow,  with the Enhance Piston Head for TM Spec G18c Gel Blasters

CowCow Enhanced G18C Piston Head For TM G-Series Gel Blaster Pistols Highlighted features

• Enhanced Piston Head for Air-Tightness.
• Designed to withstand high impact pressure.
• Stabilized Performance.
• Improved durability over TM piston head
• High quality anti-oil rubber material
• For TM G18c

**Important Notice**

It may cause a condition that your pistol cannot feed the gel ammo due to lightweight gas supply. You just simply remove a spacer to solve the issue. Alternatively, you should consult your X-Force pistol tech for advanced fitting to solve this issue as well.

Increasing in FPS can be achieved; however, it may require other parts to achieve this and advanced Tech skills are needed for proper installation. Improper installation / fitting can shorten the life of your Blaster, and any damage caused by improper installation will not be covered by warranty.

*PS: Please note: installing parts / assemble /fitting Gel Blaster pistol parts will need intermediate knowledge; for expert or gel ball gunsmith.
Please refer to your X-Force Pistol Tech for proper installation / fitting. Fitting may be needed as the condition of each gel ball gun might be different. Regular maintenance is needed for all gel ball guns in order to keep it in good working condition and reduce wear out issue on parts.
The actual performance is based on the overall setting on your airsoft gun. Please consult your X-Force Pistol Tech for advice.
Strong Screw glue, such as Loctyte, is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.