CowCow Hi-Capa NP1 180% Nozzle Spring

For TM Hi-Capa, 1911 series, M45A1 & V10

NP1 Nozzle Spring by CCT was?made by high quality spring steel. Its special design is able to supply an addition tension during cycling and enhance the durability. It can make sure the nozzle movement stable and workable. It provide 180% power during cycling.

*Installation Method*
CCT NP1 Nozzle Spring is a little longer than the original one. Need to use the sticky tape to temporary fixing the spring. The sticky tape can be removed after BBU is installed.

It may has a condition that your pistol cannot feed the gel ammo due to lightweight gas supply. You just simple remove a spacer to solve the issue. Alternatively, you may consult your pistol tech for advancing fitting to solve this issue as well.

Increasing in FPS can be achieved; however, it may require other parts to collaborate and advanced skill is needed. improper installation / fitting can shorten the life of the product.

*PS: Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or gel ball gunsmith. Please refer to your gel ball gunsmith for proper installation / fitting. Fitting may be needed as the condition of each gel ball gun might be different. Regular maintenance is needed for all gel ball guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your gel ball gunsmith for advising. Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used.