AZTECH Hellfire 3D Polymer Hop Up

Introducing the AZTECH Hellfire 3D Polymer Hop Up

The AZTECH Hellfire 3D Polymer Hop Up is designed to elevate both the performance and appearance of your gel blaster. With its aggressive muzzle brake styling and cutting-edge features, this hop-up enhances accuracy, range, and control during gameplay.

Building on the proven Muzzletek technology, the Hellfire hop-up offers unparalleled inner barrel stabilisation and precise 180° hop-up adjustment. This tool-less adjustment feature allows you to fine-tune hop settings effortlessly by rotating the front housing, giving you control over shot trajectory with ease.

The Hellfire side ports effectively disperse gases and vapour, replicating the look and function of a real muzzle brake. Designed for universal fitment, it supports 14mm counter-clockwise threaded gel blaster rifle barrels and accommodates inner barrels up to 12mm longer than the outer barrel.

AZTECH Hellfire 3D Polymer Hop Up Key Features:

• Aggressive muzzle brake design for enhanced aesthetics and performance
• Advanced 180° tool-less hop-up adjustment for precision shooting
• Inner barrel stabilisation for improved accuracy and consistency
• Compatible with 14mm CCW threaded gel blaster barrels
• Polymer tough construction for durability in the heat of battle
• Ideal for M4 and AK variants, extending range and accuracy
• Transform your gel blaster’s performance with the AZTECH Hellfire 3D Polymer Hop Up, the perfect blend of style and functionality.

(Please note the 12mm, any more than 12mm and the inner barrel will make contact with the inner tongue of the hop unit and will either break the inner or push it out of its seat, we would recommend 10mm or 11mm maximum OR don’t turn the hellfire all the way onto your outer barrel to ensure it doesn’t make contact.)

AZTECH Hellfire 3D Polymer Hop Up Fitment Instructions:

• Thread the Hellfire in a reverse direct until threaded all the way on(maximum of 12mm) making sure to be careful that the inner barrel doesn’t make contact with the rear of the internal tongue. If it does make contact, unwind the hop until it has clearance.
• It more than likely will not have perfect rotation alignment to set the hop ramp at 12 o’clock
• Rotate to set the alignment correctly then use the side grub screws to hold the Hellfire firmly in the correct position
• To adjust the hop up, Turn the slotted end cap to lower the hop ramp, the cap rotates just 90 degrees offering 8 settings
• If a permanent fixture we would recommend using a low strength Loctite to hold the side grub screws in place and if you wish a small amount on the main thread from hop to out barrel.

Designed, made and hand assembled in Australia!

Thread of main hop up: M14 CCW

Adjustment: Tool-less, rotate the front face for adjustment

Fitment: 1.5mm Allen key for the 2x side locating grub screws.

To replace the inner assembly of the adjustable tongue, remove the front adjuster cap, ensure to use substantial amount of heat to release the Loctite holding the stainless grub screw for the adjuster cap. If you don’t you may strip the 1.5mm Allen head grub screw. If you strip the stainless steel grub screw then there is a high chance of ruining the outer to get it out.