DK-AUG Adjustable Hop Up for LH AUG Steyr Gel Blasters

Made from high density nylon, 3D Printed, for greater strength. Designed for the LeHui LH AUG Steyr, though this hopup will generally fit onto any metal 14mm CCW threaded outer barrel.

Although the hopup itself doesn’t have any threads in the end that pushes onto the outer barrel, the inner diameter of the hopup should push onto most 14mm CCW threaded outer barrels. The reason we suggest only using on metal outer barrels, is that pushing this onto nylon outer barrels, will most likely cause damage to the threads on the nylon barrel.

DK-AUG Adjustable Hop Up for LH AUG Steyr Gel Blaster Features

• Hop ups increase shooting distance  and improve accuracy by applying back spin on the gel balls as they leave the barrel,
• High quality DK Hop Up,
• Fully Adjustable,
• Perfect fit for the LH AUG Steyr.

DK-AUG Adjustable Hop Up for LH AUG Steyr Gel Blaster instructions:

• Push onto the threaded end of the outer barrel with flap on top.
• Rotate the hopup to make sure the tongue is at the top most point, then tighten the 2 grub screws on either side to secure it to the barrel.
• To adjust the degree of “Hop” and increase lift, simply adjust the angle of the hopup tongue by tightening or loosening the grub screw that is at the front, top most point of the hopup.

What’s in the pack:

• 1 x Adjustable Hop Up
• 1 x Allen Key (Hex Wrench [U.S.] lol)
• 2 x Hex head grub screws (1 for use to adjust the hopup, plus one spare)

Gel blasters are toys only and are NOT weapons or firearms.