Assault Rifles
Pistols
Pistols Manual and Electric
Shotguns
SMG
Cylinder Assembly
Free Shipping
Free Australia Post Shipping on orders over $150
SHS Tappet Plate for Version 2 Gel Blaster Gearboxes $15.00 Incl. GST
2cm Metal Fluted Outer Barrel Extension with Grub Screw - Black Original price was: $12.95.$9.95Current price is: $9.95. Incl. GST
GladiatAir HPA Regulator O-Ring – Polyurethane
$4.00 Incl. GST
is available on purchases between $40 and $500
learn more
GladiatAir HPA Regulator O-Ring – Polyurethane
Replacement Polyurethane O-ring for the neck of the HPA Cylinder, where the regulator sit on top of the HPA tank.
Polyurethane O-rings are made of general purpose polyurethane rubber, which is known for its combination of hardness and elasticity. Polyurethane O-rings have excellent abrasion resistance and high breaking strength. O-rings of polyurethane are resistant to oils, aging, ozone, heat, electricity, as well as to many chemicals.
Polyurethane O-rings perform well at low temperatures, but are not recommended for high temperature or superheated steam.
When installing your O-ring, and any time you remove then replace the regulator, we recommend us a good quality silicone grease to help the O-ring seat properly and seal properly.
Such as the Abbey Silicone Grease.
Abbey Silicone Grease
Sold individually.
Special Note: Only fill HPA cylinders from filtered “breathing Air” Scuba compressors. Contamination to the cylinder from oil, dust or any dirt, by filling using compressors that are not specifically designed to pump out clean “Breathable” quality, high pressure air, will void the warranty on your cylinder. This will also potentially void the warranty, and damage, the HPA gun that your cylinder is powering.
14 in stock ( at the Meadowbrook Distribution Centre )
Fast Shipping
Dispatch within 24-48 Hours (Weekends and Public Holidays excluded)
Quality Products
We only deal in original Gel Blasters and high quality Accessories
30 Days Warranty
All our products are covered by the industry standard 30 days warranty
Specifications
GladiatAir HPA Regulator O-Ring – Polyurethane
Replacement Polyurethane O-ring for the neck of the HPA Cylinder, where the regulator sit on top of the HPA tank.
Polyurethane O-rings are made of general purpose polyurethane rubber, which is known for its combination of hardness and elasticity. Polyurethane O-rings have excellent abrasion resistance and high breaking strength. O-rings of polyurethane are resistant to oils, aging, ozone, heat, electricity, as well as to many chemicals.
Polyurethane O-rings perform well at low temperatures, but are not recommended for high temperature or superheated steam.
When installing your O-ring, and any time you remove then replace the regulator, we recommend us a good quality silicone grease to help the O-ring seat properly and seal properly.
Such as the Abbey Silicone Grease.
Abbey Silicone Grease
Sold individually.
Special Note: Only fill HPA cylinders from filtered “breathing Air” Scuba compressors. Contamination to the cylinder from oil, dust or any dirt, by filling using compressors that are not specifically designed to pump out clean “Breathable” quality, high pressure air, will void the warranty on your cylinder. This will also potentially void the warranty, and damage, the HPA gun that your cylinder is powering.
Description
Materials: Polyurethane
Weight: >1g
Dimensions: 2 x 2 x 0.2 cm
Additional information
| Weight | 0.0012 kg |
|---|---|
| Dimensions | 6 × 4 × 0.2 cm |
| Brands | |
| Colour |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Recommended Products
You may also like…
SHS Tappet Plate for Version 2 Gel Blaster Gearboxes $15.00 Incl. GST
2cm Metal Fluted Outer Barrel Extension with Grub Screw - Black Original price was: $12.95.$9.95Current price is: $9.95. Incl. GST
GladiatAir HPA Regulator O-Ring – Polyurethane
$4.00 Incl. GST
is available on purchases between $40 and $500
learn more
GladiatAir HPA Regulator O-Ring – Polyurethane
Replacement Polyurethane O-ring for the neck of the HPA Cylinder, where the regulator sit on top of the HPA tank.
Polyurethane O-rings are made of general purpose polyurethane rubber, which is known for its combination of hardness and elasticity. Polyurethane O-rings have excellent abrasion resistance and high breaking strength. O-rings of polyurethane are resistant to oils, aging, ozone, heat, electricity, as well as to many chemicals.
Polyurethane O-rings perform well at low temperatures, but are not recommended for high temperature or superheated steam.
When installing your O-ring, and any time you remove then replace the regulator, we recommend us a good quality silicone grease to help the O-ring seat properly and seal properly.
Such as the Abbey Silicone Grease.
Abbey Silicone Grease
Sold individually.
Special Note: Only fill HPA cylinders from filtered “breathing Air” Scuba compressors. Contamination to the cylinder from oil, dust or any dirt, by filling using compressors that are not specifically designed to pump out clean “Breathable” quality, high pressure air, will void the warranty on your cylinder. This will also potentially void the warranty, and damage, the HPA gun that your cylinder is powering.
14 in stock ( at the Meadowbrook Distribution Centre )
Free Shipping
Free Australia Post Shipping on orders over $150
Fast Shipping
Dispatch within 24-48 Hours (Weekends and Public Holidays excluded)
Quality Products
We only deal in original Gel Blasters and high quality Accessories
30 Days Warranty
All our products are covered by the industry standard 30 days warranty
Reviews
There are no reviews yet.