Fast Shipping
Same-day dispatch, when the order is placed before 1 PM AEST
$3.00 Incl. GST
is available on purchases between $40 and $500 learn more
Replacement Polyurethane O-ring for the high pressure regulator’s, internal valve.
Polyurethane O-rings are made of general purpose polyurethane rubber, which is known for its combination of hardness and elasticity. Polyurethane O-rings have excellent abrasion resistance and high breaking strength. O-rings of polyurethane are resistant to oils, aging, ozone, heat, electricity, as well as to many chemicals.
Polyurethane O-rings perform well at low temperatures, but are not recommended for high temperature or superheated steam.
When installing your O-ring, and any time you remove then replace the regulator, we recommend us a good quality silicone grease to help the O-ring seat properly and seal properly.
Such as the Abbey Silicone Grease.
Sold individually.
Special Note: Only fill HPA cylinders from filtered “breathing Air” Scuba compressors. Contamination to the cylinder from oil, dust or any dirt, by filling using compressors that are not specifically designed to pump out clean “Breathable” quality, high pressure air, will void the warranty on your cylinder. This will also potentially void the warranty, and damage, the HPA gun that your cylinder is powering.
2 in stock ( at the Meadowbrook Distribution Centre )
Fast Shipping
Same-day dispatch, when the order is placed before 1 PM AEST
Quality Products
We only deal in original Gel Blasters and high quality Accessories
30 Days Warranty
All our products are covered by the industry standard 30 days warranty
Replacement Polyurethane O-ring for the high pressure regulator’s, internal valve.
Polyurethane O-rings are made of general purpose polyurethane rubber, which is known for its combination of hardness and elasticity. Polyurethane O-rings have excellent abrasion resistance and high breaking strength. O-rings of polyurethane are resistant to oils, aging, ozone, heat, electricity, as well as to many chemicals.
Polyurethane O-rings perform well at low temperatures, but are not recommended for high temperature or superheated steam.
When installing your O-ring, and any time you remove then replace the regulator, we recommend us a good quality silicone grease to help the O-ring seat properly and seal properly.
Such as the Abbey Silicone Grease.
Sold individually.
Special Note: Only fill HPA cylinders from filtered “breathing Air” Scuba compressors. Contamination to the cylinder from oil, dust or any dirt, by filling using compressors that are not specifically designed to pump out clean “Breathable” quality, high pressure air, will void the warranty on your cylinder. This will also potentially void the warranty, and damage, the HPA gun that your cylinder is powering.
Materials: Polyurethane
Weight: >1g
Dimensions: 14.2 x 14.2 x 2.2 mm
Weight | 0.0012 kg |
---|---|
Dimensions | 6 × 4 × 0.2 cm |
Brand |
Only logged in customers who have purchased this product may leave a review.
Ask an Expert
$3.00 Incl. GST
is available on purchases between $40 and $500 learn more
Replacement Polyurethane O-ring for the high pressure regulator’s, internal valve.
Polyurethane O-rings are made of general purpose polyurethane rubber, which is known for its combination of hardness and elasticity. Polyurethane O-rings have excellent abrasion resistance and high breaking strength. O-rings of polyurethane are resistant to oils, aging, ozone, heat, electricity, as well as to many chemicals.
Polyurethane O-rings perform well at low temperatures, but are not recommended for high temperature or superheated steam.
When installing your O-ring, and any time you remove then replace the regulator, we recommend us a good quality silicone grease to help the O-ring seat properly and seal properly.
Such as the Abbey Silicone Grease.
Sold individually.
Special Note: Only fill HPA cylinders from filtered “breathing Air” Scuba compressors. Contamination to the cylinder from oil, dust or any dirt, by filling using compressors that are not specifically designed to pump out clean “Breathable” quality, high pressure air, will void the warranty on your cylinder. This will also potentially void the warranty, and damage, the HPA gun that your cylinder is powering.
2 in stock ( at the Meadowbrook Distribution Centre )
Fast Shipping
Same-day dispatch, when the order is placed before 1 PM AEST
Quality Products
We only deal in original Gel Blasters and high quality Accessories
30 Days Warranty
All our products are covered by the industry standard 30 days warranty
Get access to the daily promotion, new collections and the latest news Subscribe to our Newsletters for weekly updates
Reviews
There are no reviews yet.