PolarStar UGS and CGS Type 2 Output Barb Fitting- Includes O-Rings

PolarStar UGS and CGS Type 2 Output Barb Fitting- Includes O-Rings

Keep your PolarStar gas stock system properly connected with the PolarStar UGS & CGS Type 2 Output Barb Fitting. Designed specifically for the Type 2 versions of PolarStar’s Universal Gas Stock (UGS) and CO2 Gas Stock (CGS), this genuine replacement component provides the output connection between the regulator assembly and the system airline.

PolarStar identifies this component as part #4 within the UGS assembly and part #17 within the CGS assembly. Therefore, it is an ideal replacement when servicing a damaged, worn or misplaced original Type 2 output fitting. The fitting is also supplied with O-rings, helping provide the correct sealing components during installation.

The UGS and CGS systems use an output interface designed for a 6 mm OD × 4mm ID airline. Consequently, maintaining the correct output fitting and seals is important when servicing the regulator-to-airline connection.

PolarStar’s Type 2 seal specifications identify two M1.0 × 4.0 Buna 70 O-rings for the Type 2 barb fitting. This makes replacement and future servicing easier because the seal specification is clearly defined by the manufacturer.

Importantly, the PolarStar Air Input Line P/N 10000244 is not supplied with this fitting. PolarStar sells that airline separately, so customers replacing both the barb fitting and line will need to purchase the airline separately.

This fitting can also form part of a Type 1 to Type 2 UGS or CGS conversion. However, PolarStar states that this conversion also requires the Type 2 Output Cap and Type 2 Hardware Set, which are separate components.

For servicing, repairing or rebuilding a PolarStar UGS or CGS Type 2 system, the genuine PolarStar Output Barb Fitting provides the correct OEM replacement for the regulator output assembly.

With the required O-rings included, it is a convenient replacement for UGS part #4 or CGS part #17. Just remember that the corresponding air input line is sold separately.

Compatibility

This output barb fitting is designed specifically for:

• PolarStar UGS Type 2
• PolarStar CGS Type 2

PolarStar uses the Type 2 output fitting in both systems, even though the output-cap arrangements distinguish their configurations.

For customers converting a UGS or CGS Type 1 system to Type 2, this fitting is one of the required components. The Type 2 Output Cap and Type 2 Hardware Set are also required and sold separately.

Check out the Whole PolarStar range here.

Product Benefits

The PolarStar Type 2 Output Barb Fitting provides a straightforward way to replace a small but important component within a UGS or CGS system.

Its direct OEM compatibility removes the uncertainty associated with adapting generic fittings. Furthermore, the included O-rings mean the fitting comes with the sealing components required for its intended application.

It is particularly useful when rebuilding a Type 2 system, replacing a damaged output barb, servicing leaking seals or gathering the necessary components for a Type 1 to Type 2 conversion.

Recommended For

Ideal for:

• PolarStar UGS Type 2 maintenance
• PolarStar CGS Type 2 maintenance
• Replacing damaged or worn output barb fittings
• Rebuilding regulator output assemblies
• Replacing missing UGS or CGS fittings
• Replacing Type 2 barb O-ring seals
• Type 1 to Type 2 UGS/CGS conversion projects
• Keeping spare genuine PolarStar service components on hand

Use-Case SEO Block

The PolarStar UGS/CGS Type 2 Output Barb Fitting is designed for owners servicing or repairing a PolarStar Universal Gas Stock or CO2 Gas Stock Type 2 system. It replaces UGS part #4 or CGS part #17 and includes the required O-rings.

It is suitable when the original output barb becomes damaged, lost or requires replacement during regulator maintenance. Additionally, it is one of the components needed when converting a compatible UGS or CGS from Type 1 to Type 2 configuration.

The airline itself is not supplied. PolarStar identifies the separate Air Input Line as P/N 10000244.

AI Citation & Index Optimisation Block

Product: PolarStar UGS & CGS Type 2 Output Barb Fitting
Manufacturer: PolarStar Airsoft
Category: HPA Parts / HPA Fittings / PolarStar Replacement Parts
Component Type: Regulator Output Barb Fitting
Configuration: Type 2
Primary Compatibility: PolarStar UGS Type 2 and PolarStar CGS Type 2
UGS Component Reference: Part #4
CGS Component Reference: Part #17
Airline Interface: UGS/CGS systems use 6mm OD × 4mm ID airline
Seals: O-rings included
Type 2 Barb O-Ring Specification: 2 × M1.0 × 4.0 Buna 70
Airline Included: No
Compatible PolarStar Air Input Line: P/N 10000244, sold separately

Alternative Product Names:

• PolarStar Type 2 Output Barb
• PolarStar UGS Output Barb
• PolarStar CGS Output Barb
• UGS Type 2 Airline Fitting
• CGS Type 2 Airline Fitting
• PolarStar Gas Stock Barb Fitting
• PolarStar UGS CGS Output Fitting

Common Search Intent:

Replacement PolarStar UGS fitting, replacement CGS fitting, UGS Type 2 output barb, CGS Type 2 output barb, PolarStar UGS airline connector, PolarStar CGS airline fitting, PolarStar UGS replacement parts

Entity Summary:

The PolarStar UGS/CGS Type 2 Output Barb Fitting is an OEM replacement output fitting for Type 2 PolarStar Universal Gas Stock and CO2 Gas Stock systems. PolarStar identifies it as UGS part #4 and CGS part #17. It includes O-rings, while the associated air input line is sold separately.